Gossen DIGIPRO F2 Instrukcja Użytkownika Pobierz pdf (Strona 43)

GOSSEN Foto- und Lichtmesstechnik GmbH 15

3.2.1 Flash readings

Readings can be taken with or without synchronizing cable. When

used in conjunction with a synchronizing cable the flash is triggered

by pressing the M button - the flash is automatically triggered and

measured.

 Select with the function buttons

 Adjust the desired synchronizing speed with the value buttons.

Synch range from 1 s to 1/1000 s (including 1/90 s)

 Press the measuring button M.

DIGIPRO F2 is operable for metering for a period of 45 s (meter

readiness prevails as long as F remains visible in the display)

 Trigger the flash

The measured aperture (total of flash and ambient light) appears

in the left digital display, and as a flashing mark on the analog aperture scale. The aperture for the

share of ambient light is additionally indicated on the aperture scale (in our example f/8).

3.2.2 Multiple flash

Occasionally the light output from a single flash may not be sufficient to

enable you to work at the aperture desired. In that case, simply push

the top value button until the desired f/number appears in the display.

The digital display of the time t disappears and the number of flashes

required is indicated (e.g.: F4 = 4 flashes).

The DIGIPRO F2 will calculate up to maximum of 10 flash sequences.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 55 56

Brak uwag

Gossen DIGIPRO F2 Instrukcja Użytkownika Strona 43